If used without parameters, route displays help at the command prompt. Automatic determination of the interface metric, enabled by default, determines the speed of each interface and adjusts the metrics of routes for each interface so that the fastest interface creates the routes with the lowest metric.
The asterisk matches any string, and the question mark matches any single character. For example, Using an unsupported combination of a destination and subnet mask netmask value displays a "Route: bad gateway address netmask" error message.
This error message appears when the destination contains one or more bits set to 1 in bit locations where the corresponding subnet mask bit is set to 0. To test this condition, express the destination and subnet mask using binary notation. The subnet mask in binary notation consists of a series of 1 bits, representing the network address portion of the destination, and a series of 0 bits, representing the host address portion of the destination.
Check to determine whether there are bits in the destination that are set to 1 for the portion of the destination that is the host address as defined by the subnet mask.
To add a route to the destination To add a persistent route to the destination To change the next hop address of the route with the destination of Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. If the computer is already configured for routing and remote access, skip to step 5. Else, if the server is not yet configured for routing and remote access, right click on the computer node or click on Action menu , and then click on Configure and Enable Routing and Remote Access option.
Check the checkbox of LAN routing , and click Next button. Click on Finish button and if prompted, opt to start the service. In the console tree, expand the computer node to add the IP routing rule, and then expand the IP Routing sub-tree.
A Static Route dialog box will open. Select the appropriate network connection to route from the Interface drop-down list box, and fill in the value for Destination , Network mask , Gateway and Metric.
Leave the Use this route to initiate demand-dial connections option checkbox enabled if the route is to be used for demand-dial connections. It is possible to exert some influence on this using the GUI tools. Another approach would be to use a utility like NetRouteView to edit the routing table:. The original tool for working with the routing table was route.
This has been superseded by the network shell - netsh. In order to be able to access both the resources on the LAN as well as the internet, I connect my computer: To the corporate network using a wired connection To the internet through a WiFi router We can help Windows to properly route network traffic by configuring the routing table.
To the point! OK, but how does Windows exactly determine which route to take? Some quotes are in order: While part of the answer is relating to the metric of the route, it is not the only detail that dictates the path.
0コメント