Patch soft top




















I bought a tube and having tied down the flap of vinyl over the hoop with 3 pieces of masking tape I applied an initial coat of adhesive, taking care to wipe off the excess as pressure was applied to the joint.

Once the joint was dry, approximatley 2 hours, I applied successive beads of adhesive from either side of the reapir until I had used almost all the glue.

The adhesive shrinks back quite a bit, but I have to say the resulting joint was very good and because the glue is clear very unobtrusive.

I was very pleased. This repair has held up for the past 6 months and whilst I've yet to subject it to a full season of So Cal sunshine I think its definitely worth a try if your Miata roof has suffered a similar failure. The cost and availability make it an easy thing to try and the joint appears to be srong.

This is a fix that seems to work on the soft top where a heat sealed hold-down strip has come loose from the top resulting in the top rising an inch or more above the top frame when driving with the windows up. I used a 3M brand double sided adhesive tape product to re-attach the fabric strip to the top. This tape is designed to attach accessories to car bodies. Avoid paper towels and terry towels.

What do you clean Jeep soft top windows with? The easiest way to clean your Jeep plastic windows is to use mild dishwashing liquid and warm water and a soft clean terry cloth. Rinse them well and dry with a soft clean terry cloth. How do you restore a plastic window convertible? Rinse the towel in clean water as needed to remove dirt. Repeat until window becomes clear. How do you make plastic windows clear again?

Mix the solution together. Put in a clean dish rag until it has soaked up some of the solution. Let dry for fifteen minutes and repeat if needed. What GPA is required for Lonestar? Are steel traps illegal? Co-authors You can stitch the hole in the vinyl top before you apply the patch to add extra strength to the repair job. There is no need to panic if you have a hole in your vinyl convertible top. All you need to do is get a good Tear-aid repair kit to fix the damage.

Follow this guide, and the hole in your convertible top will be repaired before you know it. As a homeowner, you probably know that your HVAC system needs regular maintenance if…. Recent Comments. View large. Simultaneously press the tape on firmly. Paint over the tape with latex paint that matches the inside of the soft top, and it will look as though there was never a tear at all. If you love your Jeep soft top, you must clean and maintain it as best as you can.

The elements are harsh on your soft top with rain, mildew, UV rays, heat, bird droppings, tar, tree sap and plenty of other things. While Jeep owners love the sun, the sun is not nice to our soft tops. Step 1: Clean the repair area with isopropyl alcohol to remove any dirt or body oils which may impact a good bond onto the convertible top.

Step 2: Trim fraying edges with scissors. In short, no, a Jeep Wrangler should not go through a carwash. If handwashing is not possible for your Wrangler then a touchless carwash will do the job. While some convertibles can brave a carwash it is not advisable for Wrangler soft tops with numerous brushes. Convertible roof repair: Stop the leak — with a repair patch Much like repairing a punctured bicycle tyre inner tube, you can patch up a convertible hood that has a small snag or tear in the fabric or vinyl.

Stormsure is one such manufacturer of DIY kits. Since soft tops can be delicate, can they survive a high-powered car wash? Going through an automatic car wash with a Jeep Wrangler soft-top is not a good idea. Dirty brushes and chemical cleaners can easily ruin plastic windows and, of course, the top itself. Instead, use a touchless car wash.



0コメント

  • 1000 / 1000